Phone Camera Settings - Mio Digi Walker 8870 User Manual

Table of Contents

Advertisement

N O T E
When saving the video in your Smartphone, the maximum recording time allowed is 15 seconds;
when saving in a storage card, you can keep on recording until the card runs out of space.
After recording, you can press the Cancel soft key in five seconds to abandon.

Phone Camera Settings

To configure Phone Camera, press the Menu soft key and select Settings on the Phone
Camera main screen. While in the Settings menu, scroll up/down to an item. To select an
option for the item, scroll left/right or press the Navigation stick to select from a submenu.
Phone Camera
Settings
Timer
Mode
Picture Resolution
Video Quality
Storage Media
Brightness
Flicker Control
Continues Interval
Description
Sets the time lag between releasing the shutter and shooting the
photo. This is helpful for avoiding blurring caused by vibration of
your Smartphone when you press a key. The options are 0~10
seconds (default is 0). For example, if you set the timer to 3, when
you press the key to shoot, the timer will start to count down and you
should keep the Smartphone steady until the time is up and the photo
is shot.
Default setting is Normal Mode. When in a dark place, select
Twilight Mode for better result.
Sets the resolution (pixels) of the photo. The options are 176x144
(default), 320x240 and 640x480.
The image resolution for videos is 176x144.
Sets the video compression level to Fast Mode or Normal Mode.
Select Normal Mode for higher video quality but larger file size and
select Fast Mode for the contrary.
Selects the storage location for the photos and videos to Storage or
SDMMC Disk.
Photos are stored in the \Storage\My Documents folder of your
Smartphone or \PhotoAlbum folder of the storage card.
Videos are stored in the \Storage\My Documents folder of your
Smartphone or \MovieAlbum folder of the storage card.
Sets the brightness control to Manual (default) or Auto.
When you use the camera indoors, you can select 50Hz or 60Hz to
match the local flicker frequency of the fluorescent lamp.
Sets the time interval (second) for taking continuous photos.
The options are 0.5s (default), 0.75s and 1s.
149

Advertisement

Table of Contents
loading

Table of Contents