Synchronizing Directly With Exchange Server - Mio DigiWalker A502 User Manual

Synchronizing Directly with Exchange Server

1. Connect the device to the Internet. (See section 10.1 for information on
installing GPRS settings using the GPRS Settings program.)
2. On the device, tap
Menu
3. Tap the
4. Follow the on-screen instructions to complete the setup.
NOTE:
If a message pops up asking you to accept security policies for synchronization with
Exchange Server, tap OK to proceed.
You may be prompted to set the password for device lock. You can set a longer
period of time (maximum of 24 hours) before the device prompts you to enter the
password again.
More Programs
Programs
Add Server Source
soft key
ActiveSync
.
.
6-3