3. If the electrolyte is at or below the
minimum level mark, continue with
the following steps.
PERIODIC MAINTENANCE AND MINOR REPAIR
1.
Bolt (X 2)
2. Screw (x 2)
4. Remove the rider seat. (See page
3-9 for rider seat removal and in-
stallation procedures.)
5. Disconnect the negative battery
lead from the battery.
6 - 3 6
I
1. Starter moter lead (black)
2. Battery positive lead (red)
3. Ignition coil assembly (x 2)
-\
4. Bolt (x 2)
6. Disconnect the positive battery
lead and the starter motor lead
from the starter motor relay.
7. Remove the ignition coil assem-
blies by removing the bolts.
8. Add distilled water to raise the
electrolyte to the maximum level
mark.