INSTRUMENT AND CONTROL FUNCTIONS
Main switch
The main switch controls the ignition
and lighting systems. The various main
switch positions are described below.
O N
All electrical systems are supplied with
power, the headlight, meter lighting,
taillight and front position lights come
on, and the engine can be started. The
key cannot be removed.
O F F
All electrical systems are off. The key
can be removed.
1. Push.
2. Release.
EAUO0028
3. Turn
P (Parking)
The meter light, taillight and position
lights are on, but all other electrical sys-
tems are off. The key can be removed.
EAU00032
The key must be pushed in from the
"OFF" position to be turned to "P".
Do not use the parking position for
an extended length of time, other-
wise the battery may discharge.
EAU00038
1. Neutral indicator light 'NEUTRAL'
2. Turn signal indicator light 'TURN'
3. Fuel level warning light 'FUEL'
4. High beam indicator light 'HIGH BEAM'
5. Oil level warning light 'OIL LEVEL'
Indicator and warning lights
Neutral indicator light "NEUTRAL"
This indicator light comes on when the
ECA00043
transmission is in the neutral position.
Turn signal indicator light "TURN"
This indicator light flashes when the
turn signal switch is pushed to the left
or right.
3-1
EAU00027
EAU03034
EAU00062
EAU00059