Yamaha Vmax VMX12N Owner's Manual page 31

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is set to "RUN".
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch.
Does the engine start?
I
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
Does the engine start?
The system is OK. The motorcycle can be ridden.
INSTRUMENT AND CONTROL FUNCTIONS
I
NO
3 - 1 8
NOTE:
This check is most reliable if performed with
a warmed-up engine.
I
The neutral switch may be defective.
checked by a Yamaha dealer.
The sidestand switch may be defective.
The motorcycle should not be ridden until
The clutch switch may be defective.
I