Replacing Headlamp Bulbs; Replacing Hid Headlamp Bulbs - Ford Focus 2004 Owner's Manual

Hide thumbs Also See for Focus 2004:
Table of Contents

Advertisement

Lights

Replacing headlamp bulbs

Make sure the headlamp switch is in the OFF position.
To remove the high or low beam headlamp bulb:
1. Lift the hood and remove the
bulb cover.
2. Swivel the wire clip to the side
and pull out the lamp.
3. Pull the bulb holder straight out
from the lamp assembly.
4. Pull the bulb straight out from
the bulb holder.
Install in reverse order.
Handle a halogen headlamp bulb carefully and keep out of
children's reach. Grasp the bulb by only its plastic base and do
not touch the glass. The oil from your hand could cause the bulb to
break the next time the headlamps are operated.
Note: If the bulb is accidentally touched, it should be cleaned with
rubbing alcohol before being used.
Replacing HID headlamp bulbs (if equipped)
The low beam headlamps on your vehicle use a "high intensity discharge"
source. These lamps operate at a high voltage. When the bulb is burned
out, the bulb and starter capsule assembly must be replaced by your
dealer or a qualified technician.
44
2004 Focus (foc)
Owners Guide (post-2002-fmt)
USA English (fus)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents