Replacing High-Mount Brake Lamp Bulbs; Replacing License Plate Lamp Bulbs - Ford Focus 2004 Owner's Manual

Lights

Replacing high-mount brake lamp bulbs

Sedan
1. Make sure the headlamp control
is in the OFF position and open the
luggage compartment.
2. Using a screwdriver remove the
trim from the tailgate.
3. Pull the bulb holder from the
lamp assembly.
4. Pull the bulb straight out.
Install in reverse order.
Coupe and wagon
1. Make sure the headlamp control
is in the OFF position.
2. Remove the screws using a torx
T20 screwdriver and then remove
the plastic cover.
3. Unclip the bulb holder from the
reflector.
4. Pull the bulb straight out.
Install in reverse order.

Replacing license plate lamp bulbs

1. Make sure the headlamp control
is in the OFF position.
2. Insert a flathead screwdriver in
the recess and pry out the complete
light assembly.
3. Pull the bulb straight out.
Install in reverse order.
48
2004 Focus (foc)
Owners Guide (post-2002-fmt)
USA English (fus)