Set Up for Direct Control
The Bang & Olufsen remote terminal controls both the OneRemote DabWiFi2 tuner and the Bang &
Olufsen audio equipment.
When selecting the tuner connected source with the Bang & Olufsen remote the corresponding input
socket is opened, and the tuner is turned on simultaneously.
The tuner can be listened to in any connected link room, but not controlled from there.
Direct Control
Set Up for CableLink Control
The Bang & Olufsen remote terminal controls the OneRemote DabWiFi2 tuner via the Bang & Olufsen
audio equipment that is transmitting control data via the 7-pin DIN connection cable.
When selecting the tuner connected source with the Bang & Olufsen remote terminal the corresponding
input socket is opened, control data transmitted via the connection cable and the tuner is turned on.
Control data is only available via some input sockets in various Bang & Olufsen audio equipment.
A OneRemote DabWiFi2 tuner connected via CableLink can be controlled from any connected link room.
CableLink Control
5
www.oneremote.dk