Table of Contents
Advertisement
Connection to Bang & Olufsen Equipment
This OneRemote DabWiFi2 tuner may be connected to any Bang & Olufsen BeoSound, BeoCenter,
BeoMaster, BeoSystem or BeoVision TV and controlled with a Bang & Olufsen remote control terminal,
but it may also be connected to equipment of any other brand and still be controlled with the Bang &
Olufsen remote control terminal.
Below tables are showing available input sockets and their designation on various Bang & Olufsen
equipment. The tables below also show the source that has to be selected to open a given input.
Thus with identified Bang & Olufsen equipment and the selected input socket the required option for the
tuner to be operable may be determined. Some input sockets allow for the CableLink option to be
selected, whereas most of the newer audio equipment requires the Direct Control option to be used.
The Direct Control Option:
The tuner is controlled directly with the Bang & Olufsen remote control terminal.
Control from a link room is not possible, although the tuner may be listened to there.
The CableLink Control Option:
The tuner is controlled with the Bang & Olufsen remote control terminal through the connected Bang &
Olufsen equipment sending control data via the connection cable. The tuner may be controlled from any
link room too.
The CableLink Control option allows for the
tuner to be listened to and controlled from any
link room.
www.oneremote.dk
The Direct Control option allows for the tuner
to be listened to but not controlled from any
link room.
11
Advertisement
Table of Contents
