Table of Contents
Advertisement
3.3 Local time setting
the other is a decoded signal. If your digital audio system does
not have a Dolby Digital decoder, you have to set the Dolby
Output option to PCM. Otherwise, set it to Bitstream.
NOTE
If the service you are currently watching does not provide
Dolby digital, you cannot watch the programme with Dolby
sound even though you set the Dolby Output option to Bit-
stream.
If the service you are watching provides Dolby digital, the
Dolby sound could be low. If so, set the DRC Type option to
RF Mode to increase the sound.
You should set your local time for timer events.
1. Set the Mode option to Auto; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table 3.1.
3. Make sure that your local time is correctly displayed on
the Local Time option.
3.3 Local time setting 17
Select the System Setting
Setting menu. You should see a
screen like the left figure.
You can set the clock manually
or use the time signal, Green-
wich Mean Time (GMT), carried
as part of the digital television
broadcast.
To use Greenwich Mean Time,
take the following steps:
Time
Advertisement
Table of Contents
