3Com 6000 series Getting Started Manual page 38

38 Chapter 3: Starting and Configuring the Router 6000
Figure 24 Slot arrangement on the 3Com Router 6080
(1)
(2)
(4)
(6)
(8)
1) Slot 0
4)Slot 3
7) Slot 6
2 Interface numbering
The following are interface numbering rules with the Router 6000:
The interfaces are represented by interface-type X/Y/Z, where
■
interface-type can be serial, asynchronous, ethernet or ATM, and so
on; X specifies the slot number; Y specifies the daughter card number
(it is 0 when no daughter card is installed); and Z specifies the
interface sequence number.
As shown in the above figures, different interfaces on an interface
■
module share the same slot number X.
For every interface, Y starts from 0 and Z indicates the interface
■
sequence on the interface module, from left to right.
2) Slot 1
5) Slot 4
8) Slot 7
(3)
(5)
(7)
(9)
3) Slot 2
6) Slot 5
9) Slot 8