Nz502E Functions Of Buttons - Clarion NZ502E Owner's Manual & Installation Manual

NZ502E Functions of Buttons

[microSD]
[OPEN]
[TA/SEND]
[ ]
[ / ]
[-]
[+]
[IR]
Note: Be sure to read this chapter while referring to front
diagram "PANEL CONTROLS".
[NAVI/AV] Button
• Press this button to enter navigation mode; press
again to return current source.
• Press and hold this button for 3 seconds to display
the brightness setting panel.
• Press this key to change display of sub LCD when
panel is closed.
[ ] Eject Button
• Press to eject disc from unit.
[Microphone]]
• Internal microphone for use during Bluetooth phone
calls. Sensitivity can be adjusted from the Settings
menu.
8 NZ502E
2
[RESET] Button
• Press this button to hardware reset the unit.
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
[AUX1 JACK ]
AUX 1 Connector.
[ ] Button
Press to search next station or channel in Tuner mode.
• Press to search next track or chapter in CD, MP3/
WMA, USB,iPod and DVD video modes.
• Press over 1second to fast forward in CD, MP3 /
WMA,USB and DVD video mode, press over 1second
again to change the speed to 2x, 4x, 8x or 16x.
• Press and hold to fast forward in iPod mode.
• Press and hold to enter manual seek status in Tuner
mode, then press briefly to seek station by step.
[ ] Button
• Press to search previous station or channel in Tuner
mode.
• Press to search previous track or chapter in CD,
MP3/WMA, USB iPod and DVD video modes.
• Press to play from beginning of current track in DVD
Audio, CD,USB Video, USB Audio ,iPod Audio, iPod
Video mode.(In play for 2 seconds)
[BND/END PS]
[NAVI/AV]
[Microphone]
[RESET]
[AUX IN]
[ ]
[ ]
[MENU/PWR]