Setting A New Starting Position For The Route - Clarion NZ502E Owner's Manual & Installation Manual

•
Tap to add the newly selected location as an intermediate destination to your
route. The other destinations of the route remain intact. Note: the new waypoint is
placed among destinations to keep the route optimal. To decide where a waypoint to
appear, use the Edit Route feature.
•
Tap to append the newly selected destination at the end of the route. The
other destinations of the route remain intact. The previous final destination is now the
last waypoint.

3.4.2 Setting a new starting position for the route

For normal navigation, all routes are planned from the current position. In order to check
future routes, simulate them or see their length in time and distance, you can turn off the GPS
receiver. Then you can set the starting point of the route to a different location than the
current GPS position.
1. If you are on the Map screen, tap
Menu.
2. In the Navigation Menu, tap
3. If you already have a route, tap
tap
58 NZ502E/NP402E English
.
to return to the Navigation
.
. If you are starting a new route,