Charging Time; Monitoring Battery Capacity - Toshiba Z30 User Manual

Charging Time

Refer to User Information Guide about charging time.
Charging notice
The battery might not begin charging immediately under the following
conditions:
The DC IN/Battery indicator might show a rapid decrease in battery
operating time when you try to charge a battery under the following
conditions:
In such cases, do the following:
1.
2.
3.
Repeat these steps two or three times until the battery recovers normal
capacity.

Monitoring battery capacity

Remaining battery power can be monitored using the following methods:
User's Manual
The battery is extremely hot or cold (if the battery is extremely hot, it
might not charge at all). To ensure the battery charges to its full
capacity, charge it at room temperature of between 5°C to 35°C (41 -
95°F).
The battery is nearly completely discharged. In this instance, leave the
AC adaptor connected for a few minutes and the battery should begin
charging.
The battery has not been used for a long time.
The battery has completely discharged and been left in the computer
for a long time.
Fully discharge the battery with the power on until the system
automatically turns itself off.
Connect the AC adaptor to the DC IN 19V jack of the computer, and to
a wall outlet that is supplying power.
Charge the battery until the DC IN/Battery indicator glows white.
Clicking the battery icon on the Windows Taskbar
Via the Battery Status in the Windows Mobility Center window
Wait several seconds to monitor the remaining operating time because
the computer needs time to check the remaining capacity of the
battery pack and then calculate the remaining operating time, based
on this together with the current power consumption.
Be aware that the actual remaining operating time might differ slightly
from the calculated time.
4-14