Toshiba Z30 User Manual page 136

2.
3.
When the computer restarts, the message "Press < Ctrl - P > to enter
Intel(R) ME Setup" appears. Press CTRL + P to enter the MEBx Setup.
To disable the AMT function, do the following:
1.
2.
Key input is based on the US keyboard layout. The following table shows
examples of the special characters in US keyboard layout.
3.
4.
5.
6.
User's Manual
On the BIOS setup utility screen, change AMT Setup Prompt to
Enabled.
Press the F10 key, and press Y key to save the settings.
Select MEBx Login, and enter the default password "admin" in the
password field.
Enter a new password. Password must comply with the following
requirements concerning character types and length:
Must be between 8 and 32 characters long.
Must contain at least one number ("0", "1-9").
Must contain a mix of lower-case ("a", "b", "z", etc.) and upper-case
("A", "B", "Z", etc.) letter.
Must contain at least one special character of the following:` ~ ! @ $ %
^ & * ( ) - = + [ ] ; ' < . > / ?
Underscore ("_") is considered the same as Roman alphabet
characters, and is not counted as a special character.
Special character you
want to input
!
@
#
$
%
^
&
*
(
)
Select Intel(R) AMT Configuration, and press the Enter key.
Select Manageability Features Selection, and press the Enter key.
Select Disabled, and press the Enter key.
Press the Y key, and press the ESC key.
Corresponding number
key (SHIFT key + a number
key)
1
2
3
4
5
6
7
8
9
0
7-15