Panasonic DMR-XW440 Operating Instructions Manual page 80

Convenient functions
Basic Settings
Clock
If the time is not set correctly, use the settings
listed in the method below.
• Automatic
This unit usually obtains time and date
information from digital broadcasts.
• Region Selection
Select the region where you live to adjust the
standard time.
• The time contained in the broadcast signal is
UTC (Universal time, coordinated).
• Daylight Saving Time
Select time offset from the standard time for
Summer Time.
• If there is a gap between displayed time and
actual time, set this function.
• Manual Setting
1 Select "Off" of "Automatic", then press [OK].
2 Select the item you want to change.
3 Change the setting.
4 Press [OK] when you have finished the
settings.
PIN Entry
You can set/change the PIN for parental control.
1 Enter your 4-digit PIN with the number
buttons.
2 Enter the new 4-digit PIN with the number
buttons.
• Make a note of PIN in case you forget it.
e.g.,
PIN Entry
Remember the PIN.
0 0 0
OK
3 Press [OK].
80
SQT0134
0
System Update
Software Update in Standby
When you set this unit to standby mode,
software (firmware) updates (
downloaded automatically at the time you
have specified.
Software Update Now ( Internet )
Refer to "Software (Firmware) Update".
( 81)
Software Licence
Information about the software licence is
displayed.
System Information
Display Software (firmware), HDAVI Control
version of this unit.
Initialize
Shipping Condition
All the settings except for basic settings return
to the factory preset.
• The timer recording programmes are also
cancelled.
• The device password is also initialized.
( 77)
Default Settings
All the settings other than the tuning settings,
clock settings, disc language settings, rating
PIN, remote control code, device password,
etc. return to the factory presets.
81) are