Panasonic DMR-XW440 Operating Instructions Manual page 78

Convenient functions
Basic Settings
Home Network Settings
You can set the DLNA (Server) function.
( 58)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
• If "On" is selected, the setting for "Quick
Start" is fixed to "On". (
• If "Off" is selected, the setting for
"Remote Recording function" is fixed to
"Off". ( 77)
Setting device name
It is also possible to change the name of
this unit on the network.
• Select from a preset list
Select the preset name, then press [OK].
• Create name
Enter the name.
Refer to "Entering text". (
78
SQT0134
79)
84)
Conversion Setting for DLNA
• On:
When playing back on DLNA (Client)
compatible equipment, this setting
reduces the chance of break-ups and
freezing of an image by lowering the
image quality.
• When this is set to "On", switching the channel or
starting playback will take longer.
Resolution Setting for DLNA
When "Conversion Setting for DLNA" is set
to "On", select the image quality.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select "Yes", then press [OK].
• To deregister equipment
1 Select the registered equipment, then
press [OK].
2 Select "Yes", then press [OK].
• This function cannot be enabled when "Automatic"
is selected in "Registration type for remote
devices". ( above)
• The maximum number of equipment that can be
registered is 16.