Canon XF205 Instruction Manual page 237

• Maximum Data Transfer Rates (theoretical values):
11 Mbps (IEEE802.11b), 54 Mbps (IEEE802.11a/g), 150 Mbps (IEEE802.11n)
Available frequencies and channels
The camcorder's Wi-Fi functions operate in a predetermined range of frequencies and channels. Note that
not all channels may be available for a direct Camera Access Point connection with Wi-Fi-enabled devices.
Frequency
2412 MHz to 2462 MHz
5280 MHz to 5320 MHz
5745 MHz to 5805 MHz
Terminals
• 3G/HD-SDI Terminal
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced
3G-SDI: SMPTE 424M, SMPTE ST 425-1
Video (1080P), embedded audio, time code (VITC/LTC)
HD-SDI: SMPTE 292-1
Video (1080i or 720P), embedded audio, time code (VITC/LTC)
• MON. Terminal
BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced
HD-SDI: SMPTE 292-1
Video (1080P, 1080i or 720P), embedded audio, time code (VITC/LTC)
SD-SDI: SMPTE 259M
Video (480i), embedded audio, time code (VITC/LTC)
• HDMI OUT Terminal
HDMI connector, output only, supports 1080/59.94P output
• AV OUT Terminal
∅ 3.5 mm stereo mini-jack, output only
Video: SD composite signal, 1 Vp-p / 75 Ω, unbalanced
Audio: -10 dBV (47 kΩ load) / 3 kΩ or less, stereo
• INPUT 1, INPUT 2 Terminals
XLR jack (pin1: shield, pin2: hot, pin3: cold), 2 sets
Sensitivity
MIC setting: -60 dBu (manual volume center, full scale -18 dB) / 600 Ω
LINE setting: 4 dBu (manual volume center, full scale -18 dB) / 10 kΩ
Microphone attenuator: 20 dB
• MIC Terminal
∅ 3.5 mm stereo mini-jack, -72 dBV (manual volume center, full scale -18 dB) / 600 Ω
Microphone attenuator: 20 dB
• × (Headphone) Terminal
∅ 3.5 mm stereo mini-jack, -G to -12 dBV (16 Ω load, volume range Min to Max) / 50 Ω or less
• GENLOCK/SYNC OUT Terminal
BNC jack, input only (GENLOCK setting)/output only (SYNC OUT setting), 1 Vp-p / 75 Ω
• TIME CODE Terminal
BNC jack, input/output
Input: 0.5 Vp-p to 18 Vp-p / 10 kΩ
Output: 1 Vp-p / 50 Ω
Available for Camera Access
Channels
Point connections
1 to 11
56 to 64
149 to 161
Yes
No
Yes
Specifications
237