Setup Menu; Option Menu - Sharp AQUOS LC-32M300M Operation Manual

Setup menu

Setup Option
Auto Installation
Programme Setup
Child Lock
Input Skip
4
Input Label
Position
4
HDMI Auto View
WSS [Off]
4:3 Mode [Panorama]
Quick Start
H Child Lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
1
Repeat steps 1 to 2 in Menu operation.
2
Press a/b to select "Child Lock", and then
press ENTER.
3
If you already set the password, enter it here.
4
Press a/b to select "Change password", and
then press ENTER.
5
Enter the 4-digit number as a password using
0 — 9.
Change password Enter your new password. Use 4 digits
4
Clear password New Password – – – –
Reconfirm – – – –
6
Enter the same 4-digit number as in step 5 to
confi rm.
NOTE
• To view a locked channel (Lock setting in Programme
Setup "Manual Adjust" is set to "On"), you must enter a
password. When you select a locked channel, "Child lock
has been activated." is displayed.
• Press ENTER to display the password input window.
Clearing the password
Allow you to clear your password.
1
Repeat steps 1 to 3 in Setting a password.
2
Press a/b to select "Clear password", and
then press ENTER.
3
Press c/d to select "Yes", and then press
ENTER.
H Input Skip
This setting allows you to skip the HDMI or RGB
input on the input source selection operation.
INPUT1(HDMI) Skip input selection of HDMI
INPUT5(RGB)
Yes No
H Input Label
You can assign each input source a label as you
prefer.
1
Press TV/VIDEO to select the desired input
source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Setup".
4
Press a/b to select "Input Label", and then
press ENTER.
5
Press a/b to select a desired alphanumeric.
Maximum 6 alphanumeric can be input.
Press c/d to move to the desired
alphanumeric position.
To exit, press ENTER.
If the wrong alphanumeric is entered, select [ ]
to clear.
NOTE
• You cannot change labels if the input source is TV.
H Position
For adjusting a picture's horizontal and vertical
position.
Selected item Description
H-Position Centres the image by moving it to the left
or right.
V-Position Centres the image by moving it up or
down.
H HDMI Auto View (HDMI input mode only)
Selected item Description
Enable/ Set whether or not to use WIDE MODE
Disable based on signal recognition, including an
HDMI signal.
H WSS
WSS allows a television to switch automatically
among the different screen formats. (On, Off)
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
• Not available for COMPONENT, PC and HDMI signal.
Setup menu (Continued)
H 4:3 Mode
The WSS signal has 4:3 auto-switching that allows
you to select between Panorama and Normal.
Selected item Description
Panorama Wide image without side bars
Normal Normal range keeping 4:3 or 16:9 aspect
ratio
WSS signal 4:3 screen
4:3 mode "Panorama"
H Quick Start
You can reduce the TV's start-up time after turning
on the power with the remote control unit.
Selected item Description
On The TV quickly starts up from standby,
8.5 W or more of power consumption is
required during standby.
Off Power consumption is less than 1 W.
H Language
Select from among 10 languages: English, Simplifi ed
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
H Text Language
Select from among 3 kinds of language: West
Europe, Arabic, Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
H Identification
You can check the current version of the software on
the screen.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute "Reset", all the settings such as Picture,
Audio and Programme will be reset to the factory preset
values.
11 12

Option menu

Option
Input Select
PC Audio Select
Auto Volume
Audio Only
4
Game Play Time
4
Colour System
4
Fine Sync.
4:3 mode "Normal"
H Input Select
For setting the signal type of external equipment.
Input source
INPUT2 Auto, S-VIDEO, VIDEO
H PC Audio Select
When using the INPUT 5 terminal or HDMI1 terminal,
you must select which terminal uses the AUDIO (R/L)
jack for analogue audio input.
Selected item
HDMI1 When connecting devices (including a
PC) with DVI/HDMI cable to the INPUT
1 terminal and inputting analogue audio
signals from the AUDIO (R/L) jack.
INPUT5 When connecting a PC to the INPUT 5
(RGB) terminal, and inputting analogue audio
signals from the AUDIO (R/L) jack.
NOTE
• You must set this to "INPUT5(RGB)" when connecting
devices (including a PC) with an HDMI-certified cable to
the INPUT 1 terminal. If "HDMI1" is set, there will be no
sound output.
H Auto Volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto Volume solves
this problem and equalises the volume levels.
(On, Off)
H Audio Only
When listening to music from a music programme,
you can set the display off and enjoy audio only.
Selected item
On Audio is output without screen image.
Off Both screen images and audio are
output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to "Off".
[HDMI1]
[On]
Selectable item
Description
Description