Connecting Without Optional Tv Tuner Unit - Sony XAV-A1 Installation/Connections Manual

Av center
Hide thumbs Also See for XAV-A1:
Table of Contents

Advertisement

Available languages

Available languages

Connecting without optional TV tuner unit

* Note for the aerial connecting
If your car aerial is an ISO (International Organization for Standardization) type, use the supplied adaptor qd to
connect it. First connect the car aerial to the supplied adaptor qd, then connect it to the aerial jack of the main unit.
Active subwoofer
(optional)
Rear speakers
(optional)
Amplifiers
(optional)
Front speakers
(optional)
Parking brake
switch lead of car
Max. supply current 0.3 A
A AMP REM
To the +12 V power terminal
of the back lamp lead of car
1 3 5 7
C from the car's speaker connector
C from the car's speaker connector
2 4 6 8
1 Purple
2
3 Grey
4
5 White
6
7 Green
8
Negative polarity positions 2, 4, 6,
and 8 have striped cords.
5 7
D from the car's power connector
4 6 8
A To AMP REMOTE IN of an optional power amplifier
This connection is only for amplifiers. Connecting any other system may damage the unit.
Warning
If you have a power aerial without a relay box, connecting this unit with the supplied power
supply leads 1 may damage the aerial.
RCA interconnects
(optional)
To the optional
back camera or
SUB OUT (MONO)
video
RCA interconnects
(optional)
RC-104 (optional)
digital output
Aerial adaptor qd
REAR L/R
From car aerial*
RCA interconnects
(optional)
To game etc.
To rear
FRONT L/R
monitor etc.
Protection device
+ Speaker, Rear, Right
– Speaker, Rear, Right
+ Speaker, Front, Right
– Speaker, Front, Right
+ Speaker, Front, Left
– Speaker, Front, Left
+ Speaker, Rear, Left
– Speaker, Rear, Left
This terminal is not
used in this case.
AUX 3
AUX 2
REAR MONITOR OUT
Light green (2.5 m)
Blue/white
Purple/White (5 m)
D from the car's power connector
4 Yellow
continuous power supply
5 Blue
power aerial control
6 Orange/ switched
White
illumination power
supply
7 Red
switched power supply
8 Black
earth
Positions 1, 2, and 3 do not have pins.
See "Power connection diagram"
on next page for details.
Power
supply
leads 1
(for main
unit)
Fuse
(10 A)
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xav-c1

Table of Contents