1. Manuals
  2. Brands
  3. CompeGPS Manuals
  4. GPS
  5. TwoNav
  6. User manual

CompeGPS TwoNav User Manual

Hide thumbs Also See for TwoNav:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Manual

Content

Content .......................................................................................................................................... 1
1
Introduction............................................................................................................................. 5
2
Start up and maintenance ...................................................................................................... 6
2.1
Before starting ............................................................................................................... 6
2.2
TURN ON and HOLD .................................................................................................... 7
2.3
Battery Recharge........................................................................................................... 7
2.4
Bumps and water........................................................................................................... 8
2.5
Autonomy ...................................................................................................................... 8
2.6
Connection to PC (storage unit) .................................................................................... 9
2.7
Using the electronic compass ....................................................................................... 9
2.8
Updating the software ................................................................................................... 9
3
General description .............................................................................................................. 10
3.1
The device ................................................................................................................... 10
3.2
Navigation window....................................................................................................... 11
3.3
Menu ............................................................................................................................ 15
3.3.1
On-road/Off-road ..................................................................................................... 15
Navigate... ............................................................................................................... 15
3.3.2
3.3.3
Data Lists ................................................................................................................. 16
3.3.4
Discover ................................................................................................................... 17
3.3.5
Status....................................................................................................................... 17
3.3.6
Settings .................................................................................................................... 18
3.4
Contextual menus........................................................................................................ 19
3.5
Shifting over lists ......................................................................................................... 19
4
Settings ................................................................................................................................ 20
4.1
On-road/Off-road Selector ........................................................................................... 20
4.2
2D/3D/3D+ ................................................................................................................... 21
4.3
Data fields .................................................................................................................... 22
4.3.1
Selection of the data fields ...................................................................................... 25
4.3.2
Special Functions .................................................................................................... 25
TwoNav
User"s Manual
CompeGPS Team S.L.
http://www.compegps.com
http://support.compegps.com

Advertisement

Table of Contents
loading

Related Manuals for CompeGPS TwoNav

Summary of Contents for CompeGPS TwoNav

  • Page 1: Table Of Contents

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com TwoNav User‟s Manual Content Content ............................1 Introduction..........................5 Start up and maintenance ...................... 6 Before starting ....................... 6 TURN ON and HOLD ....................7 Battery Recharge......................7 Bumps and water......................8 Autonomy ........................8 Connection to PC (storage unit) ..................
  • Page 2 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Record the track ......................26 Favourites ........................26 Display ......................... 28 4.6.1 Available commands Default/Advanced ..............28 4.6.2 Automaps ........................ 28 4.6.3 Orientate map ......................29 4.6.4 Auto zoom ....................... 30 4.6.5 Night view ........................ 30 4.6.6...
  • Page 3 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 4.9.4 Language ......................... 45 4.9.5 Calibrate screen ...................... 45 4.9.6 Barometer calibration ....................46 4.9.7 Compass calibration ....................46 4.9.8 Folders ........................47 4.9.9 Units......................... 48 4.9.10 Coordinates ......................48 4.9.11 Time zone ......................49 4.9.12...
  • Page 4 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 8.1.7 Properties ........................ 62 8.1.8 Navigate ........................63 8.1.9 Waypoints contextual menus .................. 63 Routes ......................... 64 8.2.1 What is a route? ...................... 64 8.2.2 Supported formats ....................64 8.2.3 List of routes ......................65 8.2.4...

  • Page 5: Introduction

    This possibility of using TwoNav in any type of vehicle makes it particularly important to consider a series of rules and regulations for using it so, far from being a source of potential risks, will contribute to personal safety.

  • Page 6: Start Up And Maintenance

    TwoNav. It is very important to be alert to these changes and to adapt to the new situation. As soon as the program detects that it has not been able to follow the preset route, it will calculate a new one, which will take you to your destination just the same.

  • Page 7: Turn On And Hold

    Consequently, the information will not be visible, but the battery energy will be saved. Press longer once more to unblock. 2.3 Battery Recharge The TwoNav Aventura Li-on battery is recharged via the USB port. It is normally fitted with 3 power sources: ...

  • Page 8: Bumps And Water

     Charger for car lighter: Included in the TwoNav Aventura kit. If it is charged with the device turned off, it will take from 4 to 5 hours for a complete charge. If navigation is being carried out, it will take longer.

  • Page 9: Connection To Pc (Storage Unit)

    Li-on battery by three AA batteries. 2.6 Connection to PC (storage unit) When TwoNav Aventura is connected to the PC by means of the USB wire, the TwoNav application is closed and the device becomes a “storage unit”. Two new storage units will then be shown on your PC: ...

  • Page 10: General Description

    3 General description 3.1 The device 1. Touch screen: This is TwoNav Aventura main working tool which will allow you to enter most functions of the device by just a brief click, a long click (to open a contextual menu) or by drawing a course on it (to move over the map or the lists).

  • Page 11: Navigation Window

    11. Mini-USB Port: You may connect TwoNav Aventura to an external power source to recharge the battery or to a PC to use the device as an external storage disk (it will also charge the battery, but more slowly) (+info).
  • Page 12 13. Distance to Destination 14. Estimated time of arrival to destination 15. Menu button: Goes to TwoNav Main menu. 16. Status icons (enters status window): To indicate the present battery and GPS coverage level. The page „Status‟ is entered by pressing on them.
  • Page 13 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 21. Manoeuvre indication: Illustrates the manoeuvres to be carried out on the map and more accurately. 22. Calculated Route: Shows the automatically calculated route to be followed. 23. Zoom + 24. Zoom - 25. Scale ruler: Visual ruler to quickly evaluate distances on the screen.
  • Page 14 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 29. Currently Recorded Track: If the present track is being recorded, we can see its trace marks behind us. 30. Guide line (waypoint direction/track): Joins your present position to the place you are heading for (track or next waypoint) 31.

  • Page 15: Menu

    Nothing 3.3 Menu Most of the options of the program may be entered from the TwoNav Main menu. The On-road/Off-road mode selectors can be found in it, as well as the access to the different sections of functions and a direct access to the map.

  • Page 16: Data Lists

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com  By means of the waypoints, routes and tracks lists  By means of selection on map Check the section Select destination for further information 3.3.3 Data Lists By pressing on the DATA button on the main menu, you will be able to manage the available files on your device.

  • Page 17: Discover

    3.3.5 Status The „Status‟ allows you to know the general status of the TwoNav by displaying fields such as battery level, reception and position of satellites, luminosity of the screen, sound volume or the recording of a track.

  • Page 18: Settings

    TwoNav will attempt to fix the current position. If you are anywhere without GPS cover (e.g.: inside a building), the GPS status will be “Without position”; i.e.: TwoNav has successfully established communication with the GPS, but the GPS cannot fix your position because there is no satellite signal.

  • Page 19: Contextual Menus

    These options are grouped in the following sections „Display‟, „Vehicle‟, „Navigation‟, „System‟. 3.4 Contextual menus TwoNav uses Contextual Menus to enter the most adequate functions for each moment and option in an easy and quick manner. To open the Contextual Menu of any element (track, map, waypoint…), press on it for one second.

  • Page 20: Settings

    4 Settings TwoNav is set by default so as to meet the needs of most users. However, it is important that you spend some time analyzing which are the best options for the use you want to give to it and to adapt it to the conditions in each moment.
  • Page 21 Navigate Navigation options sections. 4.2 2D/3D/3D+ TwoNav offers three visualizing modes so you have the most adequate perspective in each moment.  2D: Zenith Plan.  3D: Three dimensional flat image, i.e. with no relief, but with a perspective.  3D+: Displays the orography of the terrain in real 3D.

  • Page 22: Data Fields

    3. Vectorial maps won‟t be displayed in 3D+ mode. 4.3 Data fields TwoNav contains a multitude of data on your navigation that may be of great interest in your outings (speed, height, distances...). This data is basically found in two spaces: 1.
  • Page 23 Press the button to enter them. TwoNav contains three pages of data that are displayed in order: 1. Data page: 8 data fields. 2. Compass page: a special field with an illustration of the compass and 6 data...
  • Page 24 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 3. Graph page: contains special field with altitude profile. If you are navigating a route or a track, it will be shown with current position marked by a vertical red line. You can zoom using buttons at top right.

  • Page 25: Selection Of The Data Fields

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Data fields are profilable to have a different set for On-Road or Off-Road. Changes made in one mode will not affect the other. 4.3.1 Selection of the data fields You can select data fields in two ways: ...

  • Page 26: Record The Track

    You can configure accuracy level of recorded track from tracklog options (+info). 4.5 Favourites Besides the possibility of creating geo-referenced points (waypoints), TwoNav also has the possibility of setting up all types of geographical locations, such as Favourites points to which navigate.
  • Page 27 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Press on the „stylus‟ icon to edit this list On the following screen, the „add‟ icon lets you create your first Favourite point Choose the way you want to create your Favourite point:  Present position: it will establish your...

  • Page 28: Display

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Display 4.6.1 Available commands Default/Advanced Default:  Automaps  Orientate map  Autozoom  Night view  Re-centering  Rotate screen Advanced:  Data fields  Tool bar  Active POI  Active personal POI ...

  • Page 29: Orientate Map

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com It is recommended to have the Automaps option always on, and more especially on those instances in which you need to make a change in navigation mode during the route. For example, if you switch from Off-road mode to On-road mode and „Automaps‟ is not on, it will mean that the new On-road route won‟t be properly calculated and the Off-road mode will still...

  • Page 30: Auto Zoom

    In low ambience light conditions, the colours and brightness of the TwoNav screen may dazzle you. TwoNav contains a „night mode‟ that reduces the brightness of the screen and displays a user interface of darker tones. By activating the „At night and tunnels‟ option, TwoNav changes to „night mode‟ automatically at...

  • Page 31: Re-Centring

    If „automatic‟ is off, you will be able to select manually if you wish to have the night mode on or not. Note: TwoNav always keeps the time updated as long as the device receives the GPS signal. Usually, inside buildings, there is no reception of satellite signals and so, automatic „Night View‟...
  • Page 32 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 1. Press on the „Type‟ pull-down menu to choose the section to be set. 2. Select the space you wish to edit (bar, page, compass o graph). Each space includes information related to its title. This way, on the compass...
  • Page 33 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 4. On the compass and graph pages, a squared icon on the side shows the place corresponding to the enhanced field (normally compass and track graph) that will be enlarged on the screen. You may place another element in the enhance field by moving the order of the fields.

  • Page 34: Tool Bar

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 4. Choose data fields for it. You can find a list of the available fields in appendix 1 4.6.9 Tool bar „Main Menu > Settings > Display > Tool bar‟ Tool bar can be customized to show the better combination for user.

  • Page 35: Reliefs

    „Main menu > Settings > Offroad > 3D Reliefs‟ TwoNav may use elevation maps (point meshes with information on the height of the ground) to have the altitude data on the references created with the program (e.g. tracks, waypoints, etc.) to habilitate the visualizing mode (3D real).

  • Page 36: Active Pois

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com  3D+ mode will only be shown if its requirements are met (see 2D/3D/3D+ section)  Altitude exaggeration: Multiplies the altitude of the relief to make a clearer effect in 3D+.  Shading: This option will cause the relief to be displayed in a clearer and attractive way, as it features shadow simulations enhancing thus the variations of the grounds.

  • Page 37: List Menu

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Besides, you may find different utilities to help you control your movement better:  Fixed ring and parallels: a circumference encircling our position will be drawn and two lines will indicate the course.  Fixed ring radium: it determines the size of the circumference surrounding our position.

  • Page 38: Vehicle

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 4.7 Vehicle “Main Menu > Settings > Vehicle” Choose your transport system to adapt aspects such as the types of roads allowed, the consideration of street direction or the expected average speed. The icon indicating your position will change colour depending on the chosen system of transport.

  • Page 39: Auto Route

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Advanced:  WPT Alert  Next WPT  Altitude  Bearing 4.8.1.2 Off-Road Default:  Tracklog  WPT Alert  Next WPT Advanced:  Speed limit  Ecocalculator 4.8.2 Auto route “Main menu > Settings > Navigation > Auto-route”...

  • Page 40: Speed Limit

     Speed warning: If you wish TwoNav to let you know when you drive over the established speed limit, you may choose among the different alert types, such as a speed limit icon, a visual alert or a visual alert plus an audible alert, or on the contrary, choose that it does not inform of it.

  • Page 41: Ecocalculator

    “Main Menu > Settings > Navigation > Ecocalculator” The Ecocalculator lets you know the CO emissions of your car and show it after the Data Bar (Datafields) during navigation if preset. To be able to calculate this emission, TwoNav considers the following parameters: ...

  • Page 42: Wpt Alert

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 4.8.7 WPT alert “Main menu > Settings > Navigation > WPT Alert” Activate this option if you wish that, when reaching a waypoint, a sound is heard. Load your SD card (folder: „TwoNavData/Data‟ by default) the sounds that you want in *wav format and select the sound.

  • Page 43: Bearing

    The „Bearing‟ data determines the orientation of the map when „orientate map‟ (track up) is enabled. (see „orientate map‟ section). TwoNav has three different ways of determining the bearing you are taking during navigation:  GPS: The latest positions received from the GPS to calculate the bearing of our present movement will be considered.

  • Page 44: System

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Note: Remember to calibrate the compass to get reliable data from it. 4.9 System 4.9.1 Volume „Main Menu > Settings > System > Volume‟. On this page you will find the following settable elements: ...

  • Page 45: Autonomy

    (engine turned off, automatic turning off of the PC, etc.), TwoNav detects the unplugging and an alert message appears. If you don‟t answer the message, after half an hour, the system will go off .

  • Page 46: Barometer Calibration

    In order for this manual calibration not to be altered by the automatic calibration process, you must set TwoNav to take the altitude by only taking the barometer reading. 4.9.7 Compass calibration „Main Menu > Settings > Off-road > Compass Calibration‟...

  • Page 47: Folders

    „Main Menu > Settings > System > Folders‟ In order for your data (maps, waypoints routes and tracks) to be considered by TwoNav when creating lists in the „data‟ section, they have to be inside the folder you have created for this purpose.

  • Page 48: Units

    , hectares or km 4.9.10 Coordinates „Main menu > Settings > System > Coordinates‟ You may choose the type of coordinates (UTM, Latitude/Longitude, BGN…) and datum (WGS 84, European 1950, Geodetic Datum 1949, etc.) with which you wish to work in TwoNav.

  • Page 49: Time Zone

    „About‟ shows you which TwoNav version the device is working with. It will be displayed on the top left hand corner of the screen. To know the version of the TwoNav program installed in your device, it is very important to check out doubts or software updating.

  • Page 50: Advanced

    4.9.16 Advanced „Main Menu > Settings > System > Advanced‟ TwoNav has and „advanced mode‟ which enables some extra functions that are not frequently used and could add unnecessary complexity to the system. You can enable „advanced mode‟ entering „Settings > System > Advanced‟ section. Then some advanced functions will appear directly inside that section: ...

  • Page 51: Waypoints, Routes And Tracks Lists

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com  The location you choose on the map.  To a waypoint Name: Select the category that you are searching for, introduce the wished POI name and it will be searched in all the available ones from the loaded cartography.

  • Page 52: On The Map

    (by means of a long click). Choose the „Navigate here‟ option and this point will be established as destination. 6 Following indications Once the destination is selected, TwoNav will assist you in reaching it. TwoNav offers two navigation ways that will allow you to adapt to each surroundings in the best possible modes:...
  • Page 53 On Road : Door to door navigation on the CompeGPS V-maps cartographic basis, enjoying the characteristic assistance type of the urban navigators. The route will be automatically calculated through the streets and along the itinerary accurate visual and aural indications will be given on the manoeuvres to carry out.

  • Page 54: On-Road Navigation

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 6.1 ON-road Navigation The information offered by this navigation mode is more than in Off-road mode, as all the information contained in the V-maps cartographic data base is used to show accurate indications of the next manoeuvres.

  • Page 55: Audible Information

    6.1.2 Audible information In addition to the visual indications, TwoNav has a second channel to give the user indications: the sound channel. Throughout your On-road journey, the program will issue voice instructions, indicating the next manoeuvres you need to make.

  • Page 56: Off-Road Navigation

     Linked event: It is possible that you need to perform two manoeuvres in a very short space of time. In this case, TwoNav will add the second event to the first (e.g.: and then take the highway). 6.2 Off-road navigation In Off-road mode, the information on streets and roads will not be available for the route to be calculated automatically and to tell you the next manoeuvres with precision.

  • Page 57: Visual Information

    Bearing‟. 6.2.2 Audible information TwoNav does not feature automatic voices for the Off-road mode, but you may associate sounds to the waypoints of your itinerary so they are reproduced when reaching that point. You may associate sounds in WAV format to the waypoints from the properties of waypoint window.

  • Page 58: Radar Warnings / Pois

    7 Radar warnings / POIs During your navigation, TwoNav may alert you when you get close to certain points of special interest. 7.1.1 Radars One special case of these types of points is the radars that control traffic speed.

  • Page 59: Supported Formats

    *.LOC  *.GPX More waypoint formats can be imported and converted to these ones from CompeGPS Land/Air. 8.1.3 Waypoints list “Main menu > Data > Waypoints” The management of waypoints is centralized on the waypoints list, but it is also possible to carry...

  • Page 60: Open And Close

    * (the first on the „data‟ list) If there are no waypoints files loaded, TwoNav will create one with a default name (new WPT), which you will be able to modify o the waypoints list.
  • Page 61 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com „Mark and edit WPT‟ can be also accessed from „Main menu > Data > Mark and edit WPT‟ 8.1.5.1.2 Create a waypoint on the map Open the contextual menu on the point of the map where you wish to generate the waypoint and select „New >...

  • Page 62: Search Loaded Waypoint On Screen

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 8.1.5.3.2 Save waypoints as If you wish to save the waypoints file by another name, location (folder) or format (*.WPT or *.GPX), you may select the option Save WPT As from the contextual menu of the waypoints in the waypoints list.

  • Page 63: Navigate

     Bearing: orientation in degrees to the position of the waypoint. The data must be introduced in radians and TwoNav will change it automatically into degrees. 8.1.8 Navigate This option will be shown on the Contextual Menu with by a long click on the concrete waypoint from the waypoint list or on the map.

  • Page 64: Routes

    (in straight line). The route file will be saved in the *rte format. TwoNav allows you to create routes and navigate them. It also lets you modify many of its parameters. For further information, see Edit a route.

  • Page 65: List Of Routes

     *.GPX More route formats can be imported and converted to these ones from CompeGPS Land/Air. 8.2.3 List of routes “Main menu > Data > Routes” The routes management is centralized in the routes list, although it is also possible to carry out...

  • Page 66: Open And Close

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com From left to right:  Enter the waypoint properties window  Create a new waypoint within the route in which the selected waypoint is.  Zoom here  Navigate (activate) By a long click on any open route or on any concrete Waypoint within a route, the...

  • Page 67: Create And Edit

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 8.2.5 Create and edit 8.2.5.1 Create a route 8.2.5.1.1 Create a route on the map The fastest and easiest way of creating a route is from the routes editor in the navigation window, on the map.
  • Page 68 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com While editing, you may move the map by dragging it for adding waypoints in other spots in the map. The dragging movement won‟t add waypoints it will only shift the map. To include a waypoint you must click briefly.
  • Page 69 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 3. Press on the spot in the map where you want to generate the new waypoint. 4. Add as many waypoints as you wish. If you want to add waypoints in other places along the route, all you have to do is repeat step 2 and 3.
  • Page 70 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 8.2.5.2.2 Delete waypoints of the route You may delete a waypoint from the routes list or directly from the map. To do so, open the on it and select „delete waypoint‟. contextual menu 8.2.5.2.3 Move the position of the waypoints of the route You may modify the position of any waypoint on the map or by introducing its coordinates: 8.2.5.2.3.1...
  • Page 71 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com If after selecting a waypoint you click briefly on the map, a new waypoint will be created just after the selected one. 8.2.5.2.3.2 Introduce coordinates In order to modify the coordinates of a waypoint, all you have to do is enter its properties window and introduce the new value, checking that the datum and the projection are correct.

  • Page 72: Search Loaded Route On Screen

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 8.2.6 Search loaded route on screen To centre the screen on a route: 1. Enter Main Menu by clicking on 2. Select „Main Menu > Data> Routes 3. Click on a concrete waypoint and choose between: a.

  • Page 73: Activate A Route (Navigate)

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com Through the data fields: You may place the field „route graph‟ in any position in the data pages, although it is recommended to use the space of the graph page to do it. (+info) 8.2.9 Activate a route (navigate) You may activate (navigate) a route in three ways: ...

  • Page 74: Routes Contextual Menus

    If you are in Off-road mode, a straight line will be displayed from your position to the next waypoint. If you are in On-road mode, TwoNav will try to automatically calculate the sub-route through the streets in order to orientate you in detail with voice instructions.
  • Page 75 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com  Waypoint here info)  Begin route here info)  Begin track here info)  Properties of the Route (+info)  Save Route (+info)  Close Route (+info)  Edit Route (+info)  Activate (+info) 4.

  • Page 76: Tracks

    Track tools. Whenever we save the tracks in TwoNav, besides the track points, a series of data is saved that can be modified or inserted from the device, such as the name of the track, remarks, colour of display, among others. For further information check Track properties.

  • Page 77: Track List

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com *Note: If, in the same day, you have made more than one track, the names will be distinguished by a number at the end that identifies the order in which they were created, (e.g. 2008-12-15- 01.TRK, 2008-12-15-02.TRK, …).

  • Page 78: Open And Close

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 8.3.5 Open and close 8.3.5.1 Open track From the tracks list, by clicking on the name of one of the available folders, it will open. You will know it is open because it will be visible at the top of the list and with the left square marked 8.3.5.2...
  • Page 79 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 2. On this menu, select New > Begin new track here. In this moment, the menu will close and it will go into the tracks edit mode. 3. On the map and with the stylus, start creating the points of the track (by pressing on...
  • Page 80 See the edit track section to add new points or modify the existing ones. Besides the „manually‟ created tracks, TwoNav will keep creating „automatically‟ the track of your outing recording your position according to the settings of tracklog (+info on the recording of the present track).
  • Page 81 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 5. Once you are satisfied with the track, enter the contextual menu (by means of a long click on the screen) and select Close Edit. When entering the editor, the point of the selected track will be the last one, so if you press on the map, points will be added to the last part of the track.
  • Page 82 8.3.6.3 Track legs TwoNav allows you to work with tracks fractioned in legs. 8.3.6.3.1 Create legs 8.3.6.3.1.1 Create legs on an existing track You may split the track in two legs by opening the contextual menu on the point that divides the two selected legs „legs >...
  • Page 83  Calculate the altitude of the ground of each point (Import altitudes): If you have 3D relief (CDEM) loaded, TwoNav may assign each point of the track its altitude considering the information of the relief. ...

  • Page 84: Search A Loaded Track On Screen

     Assign time and speed (Assign time/speed): By using this option you may determine a time for departure and a constant speed so TwoNav calculates the estimated time of arrival to each point in the track. If a track does not contain time data, you cannot enter the...

  • Page 85: Properties

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com A window displaying the track on screen with the possibility of zooming in or out will open. 4. To exit the window you may choose between:  Press and return to the tracks list. ...
  • Page 86 As a result, a track that begins and ends in the same place may have an „accumulated climb‟ that does not match the „accumulated descent‟. CompeGPS Land lets you modify the “minimum difference to accumulate difference of level” in order to adjust it to your preferences in the track analysis.

  • Page 87: Track Graph

    The tracks list also features a direct access button to the navigation function.  Contextual menu of the track on the map (long click on the track on the map). Once activated, TwoNav will guide you along the track by using two tools:...

  • Page 88: Tracks Contextual Menu

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com  GOTO arrow: In the „next event‟ space, an arrow will be displayed to indicate a direction tangent to the track. It means you can take the direction of this arrow as a reference to keep going your way.

  • Page 89: Maps

    Maps TwoNav lets you manage a great variety of maps in an easy way. You may get more maps to use with TwoNav in various ways, from buying them directly from our web page, to calibrate paper maps with CompeGPS Land.

  • Page 90: Types Of Maps

    Besides these three types of CompeGPS own ones, you may use other types of maps that you may get by other means (air images, topographic maps from other sources, scanned and calibrated paper maps, etc.).

  • Page 91: Open And Close

    8.4.4 Open and close 8.4.4.1 Automaps By activating this position, TwoNav will try to load the best map in each moment.  In On-road mode, the V-map (road map) of the area will be loaded and the rest will be closed.

  • Page 92: Properties

    8.4.7 Multi-Maps TwoNav lets you load more than one map at the same time. If you have two maps for the same area (e.g. an orthophoto and a topographic map) and load them at the same time, one of them will hide the other.

  • Page 93: "Simulation" And "Zoom To

    9 “Simulation” and “Zoom to...” 9.1 Simulation TwoNav lets you see a representation of the itinerary you are going to follow. It will be displayed with the position icon in green to distinguish it from the „present position‟ icon in red.

  • Page 94: Zoom To

     Coordinates: TwoNav allows you to quickly visualize concrete coordinates introduced by you. Remember that to visualize what these coordinates correspond to, you must have...

  • Page 95: Support

    High quality components for a high-end device conceived to follow you during all your outdoor experiences. Don't worry about rain, dust, sun or falls, you can always count on all TwoNav Aventura extra accessories to help you achieving your goals.
  • Page 96 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com TwoNav Aventura case  Resistant material with internal compartments for storing SD card and screen protector  With 'zip-stopper' for regulating the opening of zipper  Velcros and carabineer to hang to belt or backpack Screen protector ...
  • Page 97 Doubles the life of the device during the outdoor activities  Duration about 10-20 hours depending usage Spare stylus  3 spare stylus for touchable screen of TwoNav Aventura  Resistant material and perfectly adjustable to device housing.  Fine tip, comfortable and manageable...

  • Page 98: Limited Warranty

    4- Disassembling, modifying or repairing when not performed by CompeGPS Team SL technical service. CompeGPS Team SL will not be liable for any damage derived from the use or bad use of the product, being free of any obligation if any accident occurs when the device is used in any mean of transport.

  • Page 99: Appendix 1 - Data Fields

    CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com 2- By the CompeGPS‟ on-line free support service, accessing from http://support.compegps.com web page. Once the contact has been confirmed, next steps to execute your guaranty will be communicated to the client. Any demand must come with its correspondent original receipt, where vendor name and address, date and place of purchase and type of product must be specified.
  • Page 100 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com  Accumulated Climb: Total amount climbed from departure to the present position  Accumulated Descent: Total of the descents made from departure to the present position  Atmospheric pressure: It shows the present atmospheric pressure by means of the barometric altimeter ...

  • Page 101: Appendix 2 - Equivalences Of Peculiar Signs

    14 Appendix 2 – Equivalences of peculiar signs When having to introduce an address into the TwoNav system for searching cities and streets, you may find that you have to introduce signs that do not appear in the system keypad.

  • Page 102: Appendix 3 - Operate With The Buttons

    15 Appendix 3 – Operate with the buttons It is possible to enter most of the TwoNav Aventura functionalities with no need to use the touch screen. This may facilitate work in some cases and allows for a protective screen to be placed on the device to prevent bumps dents and dirt.
  • Page 103 CompeGPS Team S.L. http://www.compegps.com http://support.compegps.com In this mode, a cross will be displayed that you will be able to move over the map to place it with accuracy on the point you want and enter functions such as waypoints, routes or tracks creation, checking properties, etc.

  • Page 104: Menus

    Long click: Open the contextual menu of the waypoint, route, track or map.  Menu: Open the contextual menu of the waypoint, route, track or map.  Mark: Brief click: Create waypoint on the present position. Long click: Capture the screen which will be saved in the TwoNav>Temp folder.  Esc: Return.

Table of Contents