ProCurve 2610 Series Management And Configuration Manual page 429

N o t e
1. In Hyperterminal, click on
Figure C-16. The Capture Text window of the Hypertext Application Used with
Microsoft Windows Software
2. In the field, enter the path and file name under which you want to store
File
the output.
show tech
Figure C-17. Example of a Path and Filename for Creating a Text File from show
tech Output
3. Click to create and open the text file.
[Start]
4. Execute
show tech
ProCurve# show tech
a. Each time the resulting listing halts and displays -- MORE --, press the
Space bar to resume the listing.
b. When the CLI prompt appears, the show tech listing is complete. At
this point, click on
copying data into the text file created in the preceding steps.
Remember to do the above step to stop HyperTerminal from copying into the
text file. Otherwise, the text file remains open to receiving additional data
from the HyperTerminal screen.
5. To access the file, open it in Microsoft Word, Notepad, or a similar text
editor.
|
Transfer Capture Text...
:
|
Transfer Capture Text
Troubleshooting
Diagnostic Tools
| in HyperTerminal to stop
Stop
C-39