Download Print this page

Operator Safety Instructions - Clarke 01207SD Operator's Manual

120v & 240v 60hz marble polisher

Advertisement

Available languages

Available languages

OPERATOR SAFETY INSTRUCTIONS

WARNING
DANGER means:
WARNING means:
CAUTION means:
Failure to read the Owner's Manual prior to operating or attempting any service or maintenance
ANGER:
D
procedure to your machine could result in injury to you or to other personnel; damage to the
machine or to other property could occur as well. You must have training in the operation of this
machine before using it. If you or your operator(s) cannot read English, have this manual
explained fully before attempting to operate this machine.
To reduce the risk of fire, use only commercially available floor cleaners and waxes intended for
DANGER:
machine application.
Risk of explosion. Floor sanding can result in an explosive mixture of fine dust and air. To
DANGER:
reduce risk of explosion, use floor sanding machine only in well ventilated area.
Operating a machine that is not completely or fully assembled could result in injury or property
DANGER:
damage. Do not operate this machine until it is completely assembled. Inspect the machine
carefully before operation.
Electrocution could occur if maintenance and repairs are performed on a unit that is not discon-
DANGER:
nected from the power source. Disconnect the power supply before attempting any maintenance
or service. Always remove the electrical plug from the electrical outlet before changing the brush,
pad or other attachment and before leaving the machine.
Using a machine with a damaged power cord could result in an electrocution. Do not use the
DANGER:
machine if the power cord is damaged. Do not use the electrical cord to move the machine.
Maintenance and repairs performed by unauthorized personnel could result in damage or injury.
WARNING:
Maintenance and repairs must be performed by authorized personnel only. Keep all fasteners
tight. Keep adjustments according to specifications.
Electrical components of this machine can "short-out" if exposed to water or moisture. Keep the
WARNING:
electrical components of the machine dry. Wipe the machine down after each use. For storage,
keep the machine in a dry building.
Always use a three-wire electrical system connected to the electrical ground. For maximum
WARNING:
protection against electric shock, use a circuit that is protected by a ground fault interrupter.
Consult your electrical contractor.
To prevent damage to the power cord, do not let the brush, pad, pad driver or wheels touch the
WARNING:
power cord when the machine is running. Always lift the cord over the machine. Do not pull the
power cord to move the machine.
Operating a machine without observing all labels and instructional information could result in
WARNING:
injury or damage. Read all machine labels before attempting to operate. Make sure all of the
labels and instructional information are attached or fastened to the machine. Get replacement
labels and decals from your authorized distributor.
®
Clarke
MP-1800
- (EN)
AVERTISSEMENT
Severe bodily injury or death can occur to you or other personnel if the DANGER
statements found on this machine or in this Owner's Manual are ignored or are not
adhered to. Read and observe all DANGER statements found in this Owner's
Manual and on your machine.
Injury can occur to you or to other personnel if the WARNING statements found on
your machine or in this Owner's Manual are ignored or are not adhered to. Read
and observe all WARNING statements found in this Owner's Manual and on your
machine.
Damage can occur to the machine or to other property if the CAUTION statements
found on your machine or in this Owner's Manual are ignored or are not adhered to.
Read and observe all CAUTION statements found in this Owner's Manual and on
your machine.
ENGLISH
EN
ADVERTENCIA
FORM NO. 71399A
- 3 -

Advertisement

loading

This manual is also suitable for:

Stuart dean mp-1800