Routine Maintenance; Warranty Conditions - Whirlpool AKC921C/IX User Manual

replace the hob pan stands, checking that they
are correctly positioned.

Routine maintenance

Have the condition and efficiency of the gas pipe and the pressure regulator (if
installed) checked periodically. If anomalies are found, do not repairs but have the
faulty part replaced.
To ensure good performance and safety, the gas regulator taps must be greased
periodically.
Periodic lubrication of the taps must only be carried out by qualified
personel, who must also be contacted if the appliance malfunctions.
Service and parts
Before leaving the factory, this appliance was tested and adjusted by specialist skilled
staff to give the best operating results. Any subsequent necessary repairs or
adjustments must be carried out with the greatest care and attention.
For this reason, we strongly advise you always to contact the Dealer who sold you the
appliance or our nearest Service Centre, specifying the nature of the problem, the
model of the equipment (Mod.), the product number (Prod. No.) and the serial
number(Ser. No.). These data are provided in the plate on the cover of this manual.
Always request the use of original spare parts.

Warranty conditions

You new appliance is covered by a warranty. The warranty conditions are provided in
full in the "Warranty conditions-Service centers" leaflet which you will find inside
the appliance
Keep the fiscal receipt or delivery note, either of which documents your purchase of
the appliance and provides proof of date of purchase, in a safe place together with the
leaflet.
If the After-Sales Service is call in, show these documents to the staff. If this
procedure is not followed, the Service-Centre will have no option but to charge for
any repairs.
If necessary, you may find your nearest Centre by consulting the" Warranty
conditions –Service centers".
20