Sony HDR-TG5 Service Manual page 31

HELP06: The Method of Attachment of FP-1077 Flexible Board
1 Apply folds to the FP-1077 flexible board as shown
in the figure below.
2 Stick adhesive tapes.
3 Match the position of the hole, and stick adhesive
tapes.
4 Paste the JN copy sheet.
1 Mountain fold
1 Mountain fold
2 Adhesive tape
3 Adhesive tape
Match the position
of the hole
4 JN Copy Sheet
HDR-TG5/TG5E/TG5V/TG5VE/TG7VE_L2
2 Adhesive tape
1 Valley fold
1 Valley fold
5 Install the hinge clamp to the FP-1077 flexible board.
6 Install the hinge assy to the hinge clamp.
5 Hinge clamp
7 Rotate the hinge assy.
8 Match the position of the boss, and stick adhesive
tapes.
9 Rotate the hinge clamp, and fix the FP-1077 flexible
board.
8 Boss
9 Hinge clamp
HELP07: MS Holder Assy
(TG5V/TG5VE/TG7VE)
On installation of the MS holder assy, adjust the
position of knob of MS holder assy and the switch
of DD-312 board.
6 Hinge assy
7
HELP