Automatic Climate Control; Control; Air Distribution Control - Ford Ranger Owner's Manual

Selecting air to windscreen will
automatically switch the A/C on and select
the outside air.
AUTOMATIC CLIMATE

CONTROL

The system controls the temperature,
amount and distribution of the air flow
automatically and adjusts them according
to the driving and weather conditions. A
short press of the AUTO button once
switches on the auto mode.
Note: When in AUTO, ensure that the
temperature is set to the desired level (22°C
(71°F) is preferred).
Note: If the climate control is operated,
information relating to this system is
displayed in the information display. See
Information Displays (page 64).
Note: Avoid adjusting the settings when
the vehicle interior is extremely hot or cold.
The automatic climate control adjusts to
the current circumstances automatically.
For the system to function properly, the side
and centre vents should be fully open.
Note: The sunload sensor is located on top
of the instrument panel. Do not cover the
sensor with any objects.
Note: The in car temperature sensor is
located behind the grill below the air
distribution control. Do not cover the grill
with any objects.
Note: At low outside temperatures, when
the system is in auto mode, the air flow will
be low and the air stream will be directed
to the windscreen and the side windows as
long as the engine is cold.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Climate Control

Air distribution control

A
B
C
To adjust air distribution, press the desired
button. The combination of settings that
can be selected are A, B, C, A and C and
B and C.
Blower
71
Windscreen
Face level
Footwell