Ford Ranger Owner's Manual page 127

WARNING
If any of the following conditions
cannot be met, do not use the tow
bar and have it inspected by properly
trained technicians.
Before starting your journey, make sure
that:
• The tow ball is correctly locked.
• The tow ball arm is fully engaged in its
seat.
Removing the tow ball arm
1. Push the lever towards the centre of
the vehicle.
2. Turn the lever anti-clockwise to unlock
the tow ball arm.
3. Remove the tow ball arm.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Towing
4x2 (vehicles with increased ride
height) and 4x4
Tighten the bolts to 218 ± 42 Nm.
Driving without a trailer
1. Remove the tow ball arm.
2. Install the plug into its seat.
To avoid risk of injury, never unlock
the tow ball arm with the trailer
attached.
Remove the tow ball when driving
without a trailer.
Maintenance
Keep the system clean.
Periodically lubricate the tow ball
mechanism with resin-free grease or oil
and the lock with graphite.
125
WARNINGS