Further details regarding the individual steps
Matching coding addresses to the heating system
The control unit must be matched to the system equipment.
As delivered condition
Adjusting the heating system design
H For selection of an appropriate design, see the following diagram.
H Coding steps
with standard programming unit, see page 67,
with Comfortrol programming unit, see page 87.
Control unit with
standard
programming unit
Design "04:00"
Design "04:01"
The coding is automatically adjusted
during DHW cylinder sensor
connection when operating with a
DHW cylinder.
Control unit with
Comfortrol
programming unit
Design "000:000"
Design "000:001"
23