Random Track Play (Mix); Repeating Tracks (Repeat); Scanning Tracks (Scan); Displaying Cd Text - Blaupunkt Seattle MP74 Operating Instructions Manual

CD MODE

Random track play (MIX)

Press the softkey 5 assigned to
the "MIX" display item.
"MIX CD" appears briefly in the display.
The next track to be played will be
picked at random.
Cancelling MIX
Press the softkey 5 assigned to
the "MIX" display item again.
"MIX OFF" appears briefly in the dis-
play.

Repeating tracks (REPEAT)

Press the softkey 5 assigned to
the "REPEAT" display item.
"REPEAT TRACK" appears briefly in the
display. The track is repeated continu-
ously until you deactivate REPEAT.
Cancelling REPEAT
Press the softkey 5 assigned to
the "REPEAT" display item again.
"REPEAT OFF" appears briefly in the
display.
Normal playback is then resumed.
66

Scanning tracks (SCAN)

You can briefly play (scan) all the tracks
on the CD.
Press and hold down the joystick
OK 8 for longer than two sec-
onds.
The subsequent tracks on the CD are
briefly played in ascending order.
Note:
You can set the scanning time. For
further details, please read the sec-
tion entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling SCAN and continuing
listening to a track
To cancel scanning,
press the joystick OK 8.
The currently scanned track will then
continue to be played normally.

Displaying CD text

Some CDs include CD text. The CD text
might contain the names of the artist,
album and tracks.
You can allow the CD text to be dis-
played as scrolling text in the bottom line
of the display every time you switch to
another track.
If the inserted CD does not contain any
CD text, "NO TEXT" will appear briefly
in the display if the CD text feature is
activated.
Switching CD text on/off
Repeatedly press the softkey 5
assigned to the "TEXT" display
item until "CD TEXT ON" or "CD
TEXT OFF" is displayed.