Advertisement
Installation Guide:
Avoid locating the Bell Push/Chime on or directly
1
near metallic surfaces as this may reduce the
operation range.
UPVC Door Frames:
When locating the bell push onto a UPVC door,
always check the operating performance before final
installation, internal metal frame may affect
performance.
Tip: Try adjusting the location of the Bell Push to the Left/Right
or place on external wall.
Installation Guide: Bell Push
2
1: Using back plate as a
template.
'CLICK'
2: Making sure UP arrow
points UP.
2: Mark and drill holes.
3: Insert wall plugs and attach
to wall using screws
provided.
4: Clip the Bell Push on to the
back plate making sure the
Bell Push 'Clicks' in to
place.
Tip: The Bell Push can be
installed using a suitable
double sided adhesive tab or
tape when drilling is not
sutiable.
Installation Guide: Chime
3
Place the door Chime within the operating range,
transmission of the wire free signal through
Walls, Doors and Ceilings etc, may reduce the operating
range. Chime unit for INDOOR use only.
Changing Batteries:
Bell Push:
1: Remove back plate from the
Bell Push.
2: Remove old battery
3: Replace with new '23A' 12V
battery.
4: Insert into holder making sure
'+/-' match the internal
marking
5: Test Chime Kit.
Chime Unit
1: Remove old Batteries.
2: Insert new batteries, 3 X 1.5V
size 'AA'.
3: Make sure '+/-' match the
internal markings.
4: Test Chime Kit.
Always dispose of old batteries in an
environmentally friendly way.
User Hints:
In case of the door chime does not sound, please check the
followings:
a) Flat batteries in either Push Button or Door Chime.
b) Wrong battery polarity in either Push Button or Door Chime.
c) For Plug-in Door Chimes make sure the socket is switched on.
d) Bell Push and Door Chime are not paired together, see setup
guide.
e) Materials in between the Bell Push & Chime will reduce the
operating range, move the Door Chime closer to the Bell Push
f) Wire free devices can be affected by external sources e.g. wire
free home alarms or power transformers/adapter
Range Guide
Diagram for illustration purposes only
Address Code:
The MP3 Door Chime, comes preset to a default address code, this
code may need to be changed if the chime rings due to a
neighbouring door chime or similar wire free product.
e.g.
ON
1
2
Type R2 Device - device where the sound output is created by the initial
operation of the control and where the period of sound output continues
for the designed duration irrespective of condition of the control.
There are no serviceable parts, do not repair. The appliance is not to be used by children or persons with
reduced physical, sensory or mental capabilities, or lack of experience and knowledge,unless they have been
given supervision or instruction. Children should be supervised to ensure that they do not play with the
appliance.
Specification
Bell Push: MPT
Power: 1 x 23A 12V DC Battery
(Included)
IP44 Weather Resistant
Tel: 0845 2301231 (UK)
9-5 Mon-Fri, Local call charges apply
support@chbyron.com
www.chbyron.com
GB: CH Byron
Byron House, Sherwood Rd
Astonfields, Bromsgrove
B60 3DR
UK
1: Select a new address code in the bell
push, by randomly moving the white
dip-switch's.
2: Copy the new address onto the
chimes dip-switch's. Located in the
battery compartment of the chime.
3: Test the chime kit by pressing the
bell push.
ON
Dip
Dip
1
2
3
4
5
3
4
5
6
IMPORTANT:
Portable Door Chime: MP001/HB702
Power: 3 x 'AA'/LR6 1.5V Batteries
(Not supplied)
Range: 100 Metres
Indoor Use Only
433.92MHz
R&TTE
APPROVED
A
IRL
UK
B
I
BG
DK
L
CZ
FIN
NL
EST
F
P
H
D
E
IS
GR
S
LV
LT
CH Byron Electrical United Kingdom. www.chbyron.com
Project Manager
V1.0
Mr G Hunter
6
M
N
SK
SLO
CH
PL
RO
Hide quick links:
Advertisement
