4.
If the network is security-enabled, you will be prompted to enter the key as shown below. If
not, you will connect to the network directly without entering a key.
3.3.2 In Windows 7
Windows 7 users may use the built-in wireless utility. Follow the steps below.
1.
Left-click the wireless icon
display any available wireless networks in your area. Highlight the wireless network
(displayed using the SSID) to be connected and then click Connect.
Archer T2U
AC600 Wireless Dual Band USB Adapter User Guide
Figure 3-22
Figure 3-23
in your system tray (lower-right corner). The utility will
19