MFSPOE-8 N
Installation
1. On the back of the MFSPOE-8, connect one end of a CAT5 cable
to the port labeled LAN 10/100.
2. Connect the other end of the CAT5 cable to the LAN (Local Area
Network).
3. Connect Total Control and standard network devices to any of
the eight PoE 10/100 Smart Ports.
4. Connect the supplied 48V Power Supply to the MFSPOE-8 and
then plug it into an unswitched AC outlet.
5. Once powered up, the unit begins working in approximately 30
seconds.
Wireless
Access
Point
SNP-1
Streaming Network Player
DMS-100
Single Zone Digital Amp
DMS-1200
Digital Multi-Zone Amp
DMS-1200
MFSPOE-8 Installed in a Small System
Notes:
n
The Wireless Access Point CANNOT be connected to the
MFSPOE-8; it must be connected to the Router in the LAN.
S
ETWORK
WITCH
Internet
Cable Modem
Wi-Fi Router
MFSPOE-8
MAC Filtering Switch
Page 6
I
M
NSTALLATION
ANUAL
TKP-2000
TKP-2000
MC 75 CD IP
Camera 1
TKP-100