Table of Contents
Advertisement
MFSPOE-8 N
MFSPOE-8 Installation Considerations
Only one MAC Filtering switch should be used in a typical Total
Control system. All streaming products like the DMS-1200, DMS-
100 and SNP-1 must be connected to the switch. Other Total
Control devices that don't stream (like the MRX-10 or the MRX-1)
don't have to be connected to the MFSPOE-8.
You cannot daisy-chain MFSPOE-8 MAC Filtering switches; commu-
nication between switches will be blocked. If you have more than
eight of the above streaming components, simply connect a stan-
dard network switch to any port on the MFSPOE-8 and then con-
nect the additional components to the standard switch. This allows
the additional components to benefit from the MFSPOE-8's MAC
Filtering, without affecting communication between devices. If you
need more PoE ports, you can plug any standard PoE network
switch into any of the available ports, to expand the network.
Internet
Cable Modem
Wi-Fi Router
ETWORK
Do Not Daisy›Chain MFSPOE›
MFSPOE-8
MFSPOE-8
S
I
WITCH
NSTALLATION
X
O
Page 5
M
ANUAL
MFSPOE-8
Standard Network Switch
Advertisement
Table of Contents
