Power On / Off; Power On - Zte G650 User Manual

ZTE G650/G651/G420/G120 GoTa Digital Trunking Phone
3. Please power off your phone to remove the charger and battery before
taking out R-UIM card as shown in the figure below:

Power on / off

Power on

Press and hold until you see power-on animation on the screen.
If your phone supports R-UIM card and no R-UIM card is inserted, then
your phone will prompt with "UIM card not detected" At this point, you need
to power off your phone to reinsert a valid R-UIM card, and then power on.
If your phone supports R-UIM card and the PIN code of R-UIM card is set,
your mobile phone requires inputting PIN code when powered on. Enter
correct PIN code, and press left soft key to confirm.
If you set Lock Phone as Power- on in Security , the mobile phone will
prompt with "Verify Password" when powered on. Enter correct password
to unlock the phone.
21