Table of Contents
Advertisement
degrees.
2. Push the memory card downwards to release it from the slot.
3. Pull the memory card completely out of the microSD slot on the
handset.
4. Close the rubber memory card access door.
Note: Do not remove the memory card while reading or writing to
the card. Doing so may cause data corruption on the card or
phone. If possible, insert and remove the memory card while the
phone is powered off.
2.6 Connecting to the Network
2.6.1 Power on/off Phone
Press and hold End key to power on/off the phone.The phone will
check whether UIM card inserted well or not. And then follow the prompt
indication on the display:
Searching——Search appropriate network connected.
2.6.2 Connecting the Network
After powering on, the phone automatically searches the network
available and in state of standby mode.
Besides sending and receiving calls, you can also do:
Press Left select key/OK key to enter main Menu.
Press Right select key to enter All list in Names.
*
Hold
key to lock the keypad.
22
Advertisement
Table of Contents
