Starting The Programme; Display - Miele G 6582 Operating Instructions Manual

Starting the programme

 Start the programme by closing the
door.
The programme will begin.
The In-operation indicator comes on to
show that a programme has been star‐
ted.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.

Display

The estimated duration of the pro‐
gramme selected appears in hours and
minutes in the display before the pro‐
gramme begins. During the programme,
the time left until the end of the pro‐
gramme is displayed.
Each programme stage is indicated by
a symbol:
 Pre-wash / Soak
 Main wash
 Interim rinse
 Final rinse
 Drying
 Finish
The programme duration displayed may
vary with the same programme. It is in‐
fluenced by, among other things, the
water temperature at each intake, the
reactivation process, the type of deter‐
gent, the amount of crockery and how
dirty it is.
When a programme is selected for the
first time, the display shows an average
time for a cold water intake.
The times shown in the Programme
chart refer to standard test loads and
temperatures.
Each time a programme is run, the
electronic unit takes the new conditions
into account, and calculates the time
required.
Operation
53