Error Messages (Kv-S5076H Only) - Panasonic KV-S5076H Operating Manual

Error Messages (KV-S5076H only)

Error codes corresponding to the scanner status are displayed on the LCD.
Also, when the scanner is connected to a computer, simple messages are displayed on the LCD.
For details about the error codes and messages, check in User Utility.
Error Code
U11
U12
U13
U14
U16
U18
U23
U25
U26
U30
Fxx
*1 For details, see "Cleaning the Ion Outlets and Sensors" (page 54).
Cause
The paper has jammed in the feed tray
area.
The sensors are dirty.
The paper has jammed in the exit tray area.
The sensors are dirty.
Paper has been left in the scanner.
The sensors are dirty.
A double-feed error has occurred.
A stapled document has been detected.
The ADF door is open.
A system error has occurred.
Remedy
Open the ADF door, and remove the paper.
Clean the sensors.
*1
Open the ADF door, and remove the paper.
Clean the sensors.
*1
Open the ADF door, and remove all the
paper left inside.
Clean the sensors.
*1
Open the ADF door, and remove the
jammed paper.
Open the ADF door, and remove all the
paper left inside.
Close the ADF door.
Contact your dealer.
Appendix
Operating Manual 77