Bernina 1100 Series Owner's Workbook page 71

M
ASTERING
Y
OUR
BERNINA
®
• Owner's manual pg.___
• Following the instructions in the Owner's manual thread the serger for a 4-thread overlock stitch using
both needles.
• Set all thread tension dials to normal (3-5).
• Set stitch length to 3mm.
• Adjust differential feed to 2.
• Attach the Multi-Purpose Foot (no guide), following the directions in the instruction manual for the
Multi-Purpose Foot with Guide.
• Attach the Gathering Attachment following the directions in the instruction leaflet for the Gathering
Attachment.
• Wrap the bias strip around the cord and place the wrapped cord in the groove under the foot.
• Take 2 or 3 stitches into the fabric and lower the needles into the fabric.
• Place the 3" x 18" fabric under the Gathering Attachment and next to the needles.
• Serge, covering the cord, gathering the fabric strip and seaming all layers together.
• Mount the sample on the following page.
BERNINA
M Y
ASTERING OUR
MULTI-PURPOSE FOOT
With The Gathering Attachment
Fabric: Medium weight cotton bias strip, 2" x 8"
Medium weight cotton, 3" x 8"
12" of
Needle: 80/12 Stretch
Thread: 4 cones of serger thread
Presser Foot: Multi-Purpose Foot (optional accessory)
Gathering Attachment
1/04/02
®
BERNINA
3
/ " cotton cording
8
®
1100 Series
1100 Series/71