Bernina 1100 Series Owner's Workbook page 53

M
ASTERING
Y
OUR
BERNINA
®
Fabric:
Needle:
Thread:
Presser Foot:
• Owner's manual pg.___
• Set the serger for a narrow 3-thread overlock stitch (right needle).
• Set the looper thread tension dials between 3-5 (normal).
• Loosen the right needle tension slightly.
• Pull the rolled hem lever towards you.
• Adjust the stitch length to 1.5mm.
• Attach the Blindstitch Foot.
• Move the fabric guide just to the left of the knife line on the stitch plate.
• Stiffen the lace with spray starch or fabric stiffener.
• With right sides together, place the header of the laces under the presser foot against the guide.
• Serge the laces together.
• Gently pull the lace flat and press.
• Trim and mount the sample
BERNINA
M Y
ASTERING OUR
BLINDSTITCH FOOT
Joining Lace to Lace
2 pieces of flat edging lace, 6" each
70/10 Sharp or Microtex
3 cones of serger thread
Blindstitch Foot (optional accessory for the 1100D)
1/04/02
®
BERNINA
®
1100 Series
1100 Series/53