How To Load Paper - Xerox ColorQube 9301 Quick Manual

®
Xerox ColorQube™ 9301/ 9302/ 9303

How to Load Paper

4
5
1
Tray 1
2
Tray 2
3
Tray 3
Tray 4 (Bypass)
1. Make sure the tray is in the down
position.
2. For larger media, use the tray extension.
3. Place media face down in the tray. Paper
must not be loaded above the maximum
fi ll line.
4. Make sure that the paper guides just
touch the paper.
5. The paper settings for the tray are
displayed on the touch screen.
6. Check and confi rm or change the
settings.
XEROX®, XEROX and Design® and ColorQube® are trademarks of Xerox Corporation in the United States and/or other countries. ©
2010 Xerox Corporation. All rights reserved.
Machine Overview
1
3
2
4
Tray 4 (Bypass)
5
Tray 5
6
Tray 6 (Inserter)
1. Press the button to open the door.
2. Wait for the paper tray to lower.
3. Place media face down in the tray.
Paper must not be loaded above
the maximum fi ll line.
4. Close the door. The tray
automatically rises.
• User Guides
• http://www.support.xerox.com
• Paper weights and sizes are in the
User Guide
6
Tray 5
More information
Trays 1, 2 and 3
1. Open the tray.
2. Place the media face up in the tray.
Paper must not be loaded above the
maximum fi ll line.
3. Trays 1 and 2 only. Make sure that
the paper guides just touch the
paper.
4. Close the tray. The paper settings for
the tray are displayed on the touch
screen.
5. Check and confi rm or change the
settings.
Tray 6 (Inserter)
1. Place the media face up in the tray
and check it is the correct orientation
for that media.
2. Paper must not be loaded above the
maximum fi ll line.
3. Make sure that the paper guides just
touch the paper. The paper settings
for the tray are displayed on the touch
screen.
4. Check and confi rm or change the
settings.