Asus Crossblade Ranger User Manual page 48

Q-Code table
Code Description
Clean-up of NVRAM
B6
Configuration Reset (reset of NVRAM settings)
B7
Reserved for future AMI codes
B8– BF
D0 CPU initialization error
System Agent initialization error
D1
D2 PCH initialization error
D3 Some of the Architectural Protocols are not available
D4 PCI resource allocation error. Out of Resources
D5 No Space for Legacy Option ROM
D6 No Console Output Devices are found
No Console Input Devices are found
D7
Invalid password
D8
Error loading Boot Option (LoadImage returned error)
D9
DA Boot Option is failed (StartImage returned error)
DB Flash update is failed
DC Reset protocol is not available
ACPI/ASL Checkpoints
Code Description
0x01 System is entering S1 sleep state
0x02 System is entering S2 sleep state
0x03 System is entering S3 sleep state
0x04 System is entering S4 sleep state
0x05 System is entering S5 sleep state
0x10 System is waking up from the S1 sleep state
0x20 System is waking up from the S2 sleep state
System is waking up from the S3 sleep state
0x30
System is waking up from the S4 sleep state
0x40
System has transitioned into ACPI mode. Interrupt controller is in PIC mode.
0xAC
0xAA System has transitioned into ACPI mode. Interrupt controller is in APIC mode.
1-34
Chapter 1: Product introduction