Advertisement
1-1-3. Front Panel
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off three tapes (1).
3. Disconnect two connectors (2) and two flexible
cables (3).
4. Remove two screws (4) and two bases (5).
5. Remove two screws (6) and four claws,
then remove the front panel (7).
Note:
• After replacing, attach
the tape (1) to its original position.
1-1-4. RAM Drive
1. Remove the front panel.
(Refer to item 1-1-3.)
2. Peel off three tapes (1).
3. Disconnect four flexible cable (2)
4. Remove three screws (3),
then remove the RAM drive (4).
5. Remove the connector (5).
6. Remove four screws (6),
then remove the fixing bracket (7).
Note:
• After replacing, attach
the tape (1) to its original position.
Connector (2)
Flexible
Claw
cable (3)
Claws
Screws (6)
RAM drive (4)
Screw (3)
Screws (6)
Screw (3)
Tape (1)
Flexible
cable (3)
Screws (4)
Claw
Front panel (7)
Fig. 2-1-3
Connector (5)
Tapes (1)
Tape (1)
Screw (3)
fixing bracket (7)
Fig. 2-1-4
Tape (1)
Connector (2)
Tape (1)
Bases (5)
Flexible
cable (2)
Connector
Flexible
cable (2)
Screws (6)
Advertisement
