1-1-2. HDD
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off three tapes (1).
3. Remove four screws (2).
4. Disconnect the flexible cable (3) and the connector (4).
5. Remove four screws (5), then remove the dampers (7) and HDD (8).
Note:
• After replacing, attach the tape (1) to its original position.
Connector
Claw
Flexible
cable (3)
Damper (7)
Damper (7)
Flexible
cable (3)
Damper (7)
Screw (5)
Screws (2)
Screw (5)
Damper (7)
Tape (1)
HDD (8)
Connector (4)
Screws (2)
Damper (7)
Screw (5)
Fig. 2-1-2
HDD bracket (6)
Damper (7)
Screw (5)
Tapes (1)