Operating Your Vehicle; Turn Signal/Lights Lever - Dodge 2010 Avenger User Manual

Hide thumbs Also See for 2010 Avenger:
Table of Contents

Advertisement

TURN SIGNAL/LIGHTS LEVER

Headlights/Parking Lights/Automatic Headlights
• Rotate the end of the lever to the first detent for parking lights
detent for headlights
• When set to AUTO, the system automatically turns the headlights on or off based on
ambient light levels.
Instrument Panel Dimmer
• Rotate the center portion of the lever to the extreme bottom position to fully dim the
instrument panel lights and prevent the interior lights from illuminating when a door
is opened.
• Rotate the center portion of the lever up to increase the brightness of the instrument
panel lights when the parking lights or headlights are on.
• Rotate the center portion of the lever upward to the next detent position to brighten
the odometer and radio controls when the parking lights or headlights are on.
• Rotate the center portion of the lever upward to the last detent to turn on the interior
lighting.
High Beam Operation
• Push the lever forward to activate the high beams.
NOTE: For safe driving, turn off high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.
Fog Lights
• Turn on the parking lights or low beam headlights and pull out the end of the lever.
Turn Signals/Lane Change Assist
• Tap the lever up or down once and the turn signal (right or left) will flash three times
and automatically turn off.

OPERATING YOUR VEHICLE

and the third detent for AUTO.
17
, the second

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents