Tilt / Telescoping Steering Column; Programmable Features - Dodge 2010 Avenger User Manual

Hide thumbs Also See for 2010 Avenger:
Table of Contents

Advertisement

TILT / TELESCOPING STEERING COLUMN

• Pull upward on the lever to lock the column firmly in place.
Do not adjust the steering wheel while driving. The tilt/telescoping adjustment must
be locked while driving. Adjusting the steering wheel while driving or driving without
the tilt/telescoping adjustment locked could cause the driver to lose control of the
vehicle. Failure to follow this warning may result in serious injury or death.

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC) – If Equipped
• The EVIC can be used to program the following Personal Settings. Press and release
the MENU button
button
to scroll through the settings. Press the RESET button
ON or OFF appears.
• Language
• Auto Unlock On Exit
• Remote Key Unlock
• Sound Horn With LOCK
• Flash Lights With LOCK
Key Fob Programmable Features
• The following features may also be programmed by using the Key Fob transmitter or
the ignition switch and driver's door lock switch.
NOTE: Pressing the LOCK button while you are inside the vehicle will activate the
Vehicle Security Alarm. Opening a door with the Vehicle Security Alarm activated will
cause the alarm to sound. Press the UNLOCK button to deactivate the Vehicle Security
Alarm.
GETTING STARTED
• The tilt/telescoping control lever is located
below the steering wheel at the end of the
steering column.
• Push down on the lever to unlock the
steering column.
• To tilt the steering column, move the
steering wheel upward or downward as
desired. To lengthen or shorten the steering
column, pull the steering wheel outward or
push it inward as desired.
WARNING!
until Personal Settings displays, then press the STEP
• Headlights With Wipers
• Headlamp Off Delay
• Key Off Power Delay
• ILLUMIN. Approach
• Display Units Of Measure In
15
until

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents