Aztech WL576E User Manual page 24

User Manual
 Local. Allows you to change the WL576E's IP address and subnet mask.
Do take note that the Router IP Address you would be using in this area
would also be the IP address you would be using when accessing the
web user interface of your WL576E (e.g. if new IP address is set to
192.168.1.5, you would be entering 192.168.1.5 if you want to access
the web user interface).
 Firmware. Allows you to view the current firmware date and its release
date. It also allows you to perform a firmware upgrade on your WL576E.
NOTE: It is STRICTLY recommended to ONLY use Officially Released
Aztech Firmware. Updates are periodically posted on the Aztech
support site (www.aztech.com/support).
To update the Firmware of your device:
1. Click the Choose File button.
2. Locate and select the firmware file (single.img).
3. Click the Upgrade button to save and apply changes. The
firmware upgrade might take several minutes to finish. Once
done, it will redirect you again to the Web User Interface of your
WL576E.
Page 24 of 28