Checkups Before Reporting Breakdown - Friedrich DWC1 Installation And Operation Manual

Table of Contents

Advertisement

Available languages

Available languages

Owner's instruction

Checkups before reporting breakdown

Please check the items below for product's defects before consulting service center.
Symptoms
• Is the power to the unit on?
• Check that cable is properly
No power
connected to controller/Indoor
unit.
• Is cable connection correct?
• Was time setup completed
correctly?
Reservation not
• When setting Reservation was
operating.
there any issue? Did all steps get
covered?
• Ensure desired set-point is
entered into controller and that it
Unit not blowing
cool air.
is lower than actual ambient
temperature.
• Verify that Reservation mode is
Unit runs or stops
currently enabled.
automatically.
Error indicated on
• Is error CH03?
display of
controller.
46 DWC1 Programmable Thermostat
Check
Solution
• Please check circuit breaker.
• Please check wire remote controller's
setup.
• Reconnect the cable to controller or indoor
unit connection.
• Please check again referring to setup
method at the manual.
• Please set current time correctly.
• Please set again referring to the manual.
• Adjust set-point temperature as needed.
• Press setting and set/cancel
simultaneously for 3 second or longer.
All set reservations will now be canceled.
• Check wire connection at controller.
• Check wire connection at indoor unit
connection.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents