Boot Dsp - Yamaha RX-Z9 Service Manual

15. BOOT DSP

This item is used to write in ROM for the DSP microproces-
sor and decoder through RS-232C.
FLASH WRITE
This indicates that the menu is for writing the DSP (micro-
processor, decoder) program. (No internal operation is ex-
ecuted here.)
EXTERNAL START
This is that mode for writing the decoder (SHARC) external
ROM.
The software for writing is activated and writing is executed.
START MODE
This is the mode for writing the DSP microprocessor.
The software for writing is activated and writing is executed.
• For more information about program writing, refer to "Writ-
ing of Firmware".
• Once the writing mode is used, the DSP microprocessor
is reset when the mode is cancelled.
15.BOOT DSP
FLASH WRITE
15.BOOT DSP
EXTERNAL START
15.BOOT DSP
START MODE
RX-Z9/DSP-Z9
61