ASROCK FM2A88X Extreme6+ User Manual page 35

Step 3
Connect a VGA cable or a DVI cable
to the monitor connector or the DVI
connector of the graphics card that is
inserted to PCIE2 slot.
TM
2.9.2 Installing Three CrossFireX -Ready Graphics Cards
Step 1
Insert one graphics card into PCIE2
slot, another graphics card to PCIE4
slot, and the other graphics card to
PCIE5 slot. Make sure that the cards
are properly seated on the slots.
Step 2
Use one CrossFire Bridge to connect
the graphics cards on PCIE2 and
CrossFire Bridge
PCIE4 slots, and use the other
CrossFire Bridge to connect the
graphics cards on PCIE4 and
PCIE5 slots. (The CrossFire Bridge
is provided with the graphics card
you purchase, not bundled with this
motherboard. Please refer to your
graphics card vendor for details.)
Step 3
Connect a VGA cable or a DVI cable
to the monitor connector or the DVI
connector of the graphics card that is
inserted to PCIE2 slot.
30