ASROCK FM2A88X Extreme6+ User Manual page 27

USB 3.0 Header
(19-pin USB3_5_6)
(see p.10, No. 8)
Infrared Module Header
(5-pin IR1)
(see p.10 No. 24)
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.10 No. 27)
1. High Deinition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don't
E. To activate the front mic.
"Recording Volume".
System Panel Header
(9-pin PANEL1)
(see p.10 No. 19)
Vbus Vbus
Vbus IntA_P6_SSRX-
IntA_P5_SSRX- IntA_P6_SSRX+
IntA_P5_SSRX+ GND
GND IntA_P6_SSTX-
IntA_P5_SSTX-
IntA_P6_SSTX+
IntA_P5_SSTX+
GND
GND IntA_P6_D-
IntA_P5_D- IntA_P6_D+
IntA_P5_D+
DUMMY
GND
PRESENCE#
MIC_RET
1
J_SENSE
OUT2_R
MIC2_R
MIC2_L
need to connect them for AC'97 audio panel.
®
For Windows 8 / 8 64-bit / 7 / 7 64-bit 64-bit OS:
Go to the "FrontMic" Tab in the Realtek Control panel. Adjust
Besides four default USB 3.0
ports on the I/O panel, there is
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
This is an interface for the front
panel audio cable that allows
OUT_RET
convenient connection and
control of audio devices.
OUT2_L
This header accommodates
several system front panel
functions.
22